GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 6T40/6T45 🢒 Automatic Transmission Range Selector Lever Replacement

Removal Procedure

  1. Set the park brake and chock the wheels.

    2. Object Number: 2001179 Size: SH
  2. Disconnect the transmission range selector lever cable terminal (1) from the transmission manual shift lever pin.
  3. Press the locking tabs inward in order to release the transmission range selector lever cable (2) from the cable bracket.

    4. Object Number: 2001183 Size: SH
  4. Remove the transmission range selector lever nut (1).
  5. Remove the transmission range selector lever (2).

Installation Procedure


    Object Number: 2001183 Size: SH
  1. Install the transmission range selector lever (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the transmission range selector lever nut (1).

    3. Tighten
    Tighten the nut to 20 N·m (15 lb ft).


    Object Number: 2001179 Size: SH
  3. Install the transmission range selector lever cable (2) to the cable bracket.
  4. Connect the transmission range selector lever cable terminal (1) to the transmission manual shift lever pin.
  5. Check the range selector cable adjustment. Refer to Range Selector Lever Cable Adjustment .