GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1998836  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the fluid level drain plug (1).
  3. Drain transmission fluid into a suitable container.
  4. Notice: Refer to Component Fastener Tightening Notice in the Preface section.

  5. Install the fluid level hole plug (1).
  6. Tighten
    Tighten the plug to 12 N·m (106 lb in).

Installation Procedure


    Object Number: 1998835  Size: SH
  1. Lower the vehicle.
  2. Remove the fluid fill cap (1).
  3. Fill the transmission to the proper level with the correct fluid. Refer to Transmission Fluid Check and Fluid Capacity Specifications.
  4. Install the fluid fill cap (1).