GM Service Manual Online
For 1990-2009 cars only

Object Number: 1891302  Size: MF

Callout

Component Name

1

Lock Pin

Caution: Lock pin must be secured into the bench fixture to hold the transmission and prevent bodily injury.

Tip
Ensure the J 3289-20 is mounted to a bench that is properly supported and will support the weight of the transmission assembly without tipping. J-39890 adapter and an engine stand can be used as an alternative method for supporting the transmission assembly during repairs.

Special Tools

    • J 3289-20 Holding Fixture
    • J-39890 Transmission Holding Fixture Adapter

2

J 21366 Torque Converter Holding Strap

3

Torque Converter Assembly

Notice: Only install the lift assist handles until it stops. Do not tighten. Over tightening the lift assist handles can cause damage to the torque converter.

Tip
Failure to raise the torque converter straight up could damage the torque converter clutch lip seal inside the torque converter clutch assembly.

Special Tool

J 46409 Torque Converter Lifting Handles