1

1-2-3-4 Clutch Piston

Tip
DT-47798 prevents the piston seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT-47798 to ease the installation of the piston.

Special Tool

DT-47798 Seal Protector

2

1-2-3-4 Clutch Spring

3

1-2-3-4 Clutch Spring Retainer

Notice: Regulate the air pressure to 40 psi maximum. High pressure could cause the piston to over travel and damage the piston seals.

Tip

1. Place the retainer onto DT-47799-1 which is part of DT-47799 . Compressing the spring using DT-47799-2 which is part of DT-47799 , will install the retainer into the retainer groove.
2. Apply shop air to the clutch fluid feed hole in the clutch housing to verify proper piston operation.

Special Tool

DT-47799 Clutch Piston Spring Compressor

1

Low and Reverse Clutch Piston

Tip
DT-47807 prevents the piston seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT-47807 to ease the installation of the piston.

Special Tool

DT-47807 Clutch Piston Seal Protector

2

Low and Reverse Clutch Spring

3

Low and Reverse Clutch Spring Retainer

Notice: Regulate the air pressure to 40 psi maximum. High pressure could cause the piston to over travel and damage the piston seals.

Tip

1. Place the retainer onto DT-47794-1 which is part of DT-47794. Compressing the spring using DT-47794-2 which is part of DT-47794, will install the retainer into the retainer groove.
2. Apply shop air to the clutch fluid feed hole in the clutch housing to verify proper piston operation.

Special Tool

DT-47794 Spring Compressor