Important: If one battery requires replacement, the other batteries also are to be replaced.

1. Remove the generator battery temperature sensor wiring harness. Refer to Generator Battery Temperature Sensor Wiring Harness Replacement.
2. Remove the generator battery cable nuts (1-4) from the battery cable terminals.




Important: Note original routing of battery cables to ensure proper installation.

3. Remove the generator battery cables (1-4) from the batteries.



4. Remove the generator battery bolts.
5. Remove the generator battery (1).



6. If required, remove the generator battery temperature sensor from the battery.

1. Before installing the NEW batteries, perform a voltage check. Voltage should be between 11 Volts and 14 Volts. There should not be more than a 0.7 Volt difference between each cassette.
2. If required, install the generator battery temperature sensor to the battery.



3. Install the generator battery (1).

Notice: Refer to Fastener Notice in the Preface section.

4. Install the generator battery bolts.

Tighten
Tighten the bolts to 10 N·m (89 lb in).




5. Install the generator battery cables (1-4) to the batteries.



6. Install the generator battery cable nuts (1-4) to the battery cable terminals.

Tighten
Tighten the nuts to 8 N·m (71 lb in).

7. Install the generator battery temperature sensor wiring harness. Refer to Generator Battery Temperature Sensor Wiring Harness Replacement.