1

Radiator Grille Emblem Assembly

Procedure

1. The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength.
2. Use a J 25070 Heat Gun or equivalent to remove the old emblem. Clean all adhesive from the front bumper fascia and wipe the surface dry with a clean lint-free towel prior to installing the new emblem.
3. When removing protective liners from the adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
4. Align the emblem to the front bumper fascia.
5. Using the palm of the hand, carefully wet out the emblem to the front bumper fascia and ensure full adhesion of the emblem is made.

Special Tools

J 25070 Heat Gun - 500-750F