Hood Primary Latch Release Cable Handle Replacement. Chevrolet Malibu 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Primary Latch Release Cable Handle Replacement

Callout	Component Name
Preliminary Procedures Remove the driver knee bolster panel. Refer to Driver Knee Bolster Panel Replacement. Remove the battery tray. Refer to Battery Tray Replacement. Remove the hood latch and disconnect the cable. Refer to Hood Primary and Secondary Latch Replacement.
1	Hood Primary Latch Release Cable Handle Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Hood Primary Latch Release Cable Handle

Callout

Component Name

Remove the driver knee bolster panel. Refer to Driver Knee Bolster Panel Replacement.
Remove the battery tray. Refer to Battery Tray Replacement.
Remove the hood latch and disconnect the cable. Refer to Hood Primary and Secondary Latch Replacement.

Hood Primary Latch Release Cable Handle Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2.5 N·m (22 lb in)

Hood Primary Latch Release Cable Handle