This table provides general guidelines to bond in the nylon reinforcements located in the center pillar, and the reinforcement located in the rocker area.
Important:
• Prepare the surfaces to be bonded according to the adhesive manufacturer's recommendations. Many adhesive manufacturers have different preparation methods. Do not intermix adhesive manufacturer systems. Mixing materials from different manufacturers
can produce unsatisfactory results. • Do not top coat any adhesive bonding mating surface. Use primer only on bonding surfaces. Refer to the adhesive manufacturer's recommendations for priming applications.
At this time, ONLY the adhesive products listed below meet the General Motors performance requirement. Contact the adhesive manufacturer for ordering and product information.
Manufacturer | Product |
|---|---|
L & L Product 1-800-452-6359 | 401773 L00 |
