Preliminary Procedures

1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
3. Remove the rear door outer belt sealing strip. Refer to Rear Side Door Window Outer Sealing Strip Replacement .
4. Remove the rear door inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
5. Remove the rear door window. Refer to Rear Side Door Window Replacement .

1

Stationary Window Bolt Access Plug

Procedure

Using mask tape, tape off the outer door frame to prevent scratches.

2

Rear Side Door Stationary Window Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

3

Rear Door Stationary Window

Tip
Pull the stationary window down to release it from the window frame.