Preliminary Procedures

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
3. Remove the coil spring. Refer to Coil Spring Replacement .

1

Lower Control Arm to Support Bolt/Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
110 N·m (81 lb ft)

2

Lower Control Arm

Tip
After installation, check the rear alignment. Refer to Wheel Alignment Measurement .