GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 General Information 🢒 General Information 🢒 Engine Mount Replacement

Removal Procedure

    Object Number: 1774610 Size: SH
  1. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
  2. Remove the engine splash shield. Refer to Radiator Air Lower Baffle and Deflector Replacement.
  3. Remove the engine mount to fame nuts.

    4. Object Number: 1774613 Size: SH
  4. Remove the engine mount to engine mount bracket nuts (1).
  5. Using a suitable jackstand, Place the jackstand with a book of wood under the oil pan.
  6. Remove the engine mount.

Installation Procedure

    Object Number: 1774613 Size: SH
  1. Position the motor mount onto the frame.
  2. Use the jackstand to lower the engine mount bracket on to the engine mount.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the engine mount to engine mount bracket nuts (1).

    4. Tighten
    Tighten the nuts to 50 N·m (37 lb ft).


    Object Number: 1774610 Size: SH
  4. Install the engine mount to frame nuts.

    5. Tighten
    Tighten the nuts to 50 N·m (37 lb ft).

  5. Install the engine splash shield. Refer to Radiator Air Lower Baffle and Deflector Replacement.
  6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.