Backup Lamp
Stoplamp, Taillamp and Turn Signal Lamp
- Open the trunk. See
Trunk for
more information.
- Remove the convenience net hooks holding the trunk trim.
- Remove
the three wing nuts, which hold the taillamp assembly, from inside the vehicle.
- Remove the taillamp assembly.
- Remove the wiring harness from the taillamp assembly by lifting the release
tab.
- Turn the bulb socket counterclockwise to remove it.
- Pull the bulb from the socket.
- Install a new bulb.
- Reverse Steps 2 through 5 to reinstall the taillamp assembly.
Back-up Lamp
- Open the trunk. See
Trunk for
more information.
- Remove the push nuts holding the trunk trim.
- Turn the bulb socket counterclockwise to remove from the lamp assembly.
- Install the new bulb.
- Reverse Steps 1 through 3 to reinstall.