GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Malibu 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Ignition Coil Replacement - Bank 2

Removal Procedure

    Object Number: 1839726 Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
  2. Disconnect the engine wiring harness electrical connector(s) (2) from the ignition coils.

    3. Object Number: 868186 Size: SH
  3. Remove the ignition coil bolts.
  4. Remove the ignition coils.

Installation Procedure

    Object Number: 860797 Size: SH
  1. Install the ignition coils.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the ignition coil bolts and tighten to 10 N·m (89 lb in).

    3. Object Number: 1839726 Size: SH
  3. Connect the engine wiring harness electrical connectors (2) to the ignition coils.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.