GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Malibu 🢒 Engine 🢒 Engine Mechanical - 2.2L or 2.4L 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  3. Disconnect the stabilizer link from the stabilizer shaft.

    4. Object Number: 851723 Size: SH
  4. Disconnect the stabilizer link from the strut assembly and remove from the vehicle.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 851723 Size: SH
  1. Connect the stabilizer link to the strut assembly and tighten to 65 N·m (48 lb ft).
  2. Connect the stabilizer link to the stabilizer shaft and tighten to 65 N·m (48 lb ft).
  3. Install the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  4. Lower the vehicle.