Preliminary Procedure

Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

1

Steering Linkage Outer Tie Rod Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft) + 90 degrees

2

Steering Linkage Inner Tie Rod Nut

3

Steering Linkage Outer Tie Rod

Procedure

1. Use puller J 24319-B to separate the steering linkage outer tie rod from the steering knuckle.
2. Inspect the steering linkage inner tie rod for bent or damaged threads.
3. Clean the tapered surface of the steering knuckle.
4. Lubricate the steering linkage inner tie rod threads with chassis lubricant. Refer to Fluid and Lubricant Recommendations.
5. Adjust the front toe. Refer to Front Toe Adjustment.

Special Tools

J 24319-B Steering Linkage and Tie Rod Puller