Preliminary Procedures

1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
3. Place drain pans under the vehicle as needed.

1

Power Steering Reservoir Inlet Hose Clamp

2

Power Steering Reservoir Inlet Hose

3

Power Steering Fluid Reservoir Outlet Hose Clamp

4

Power Steering Fluid Reservoir Outlet Hose

5

Remote Power Steering Fluid Reservoir Bracket Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

6

Remote Power Steering Fluid Reservoir Bracket Screw (Qty: 3)

Tighten
6 N·m (53 lb in)

7

Remote Power Steering Fluid Reservoir Bracket

8

Remote Power Steering Fluid Reservoir

Procedure

Fill and bleed the power steering system. Refer to Power Steering System Bleeding.

Tip
Clean any excess power steering fluid from the vehicle.