For 1990-2009 cars only
Removal Procedure
- Set the park brake and chock the wheels.
- Remove the console. Refer to Front Floor Console Replacement.
- Disconnect the transmission range selector lever cable terminal (2) from the shift lever pin (3).
- Release the transmission range selector lever cable retainer (1) and remove the transmission range selector cable from the transmission control lever base (4).
- Remove the park lock cable end (1) from the park lock lever by sliding the cable end reward off the park lock lever pin
- Release the park lock cable retainer (2) from the shift control base.
- Remove the transmission shift control nuts (1).
- Remove the transmission shift control (2).
Installation Procedure
- Install the transmission shift control (2).
- Install the transmission shift control nuts (1) and tighten to 25 N·m (18 lb ft).
- Attach the park lock cable to the shift control base. Ensure the park lock cable retainer (2) is fully secured to the shift control base.
- Install the park lock cable on the park lock lever by sliding the cable end (1) over the park lock lever pin.
- Install the transmission range selector lever cable retainer (1) to the shift lever base. (4).
- Install the transmission range selector lever cable terminal (2) to the shift lever pin (3).
- Adjust the automatic transmission range selector lever cable. Refer to Range Selector Lever Cable Adjustment.
- Adjust the park lock cable. Refer to Park Lock Cable Adjustment.
- Install the console. Refer to Front Floor Console Replacement.
Caution: Refer to Fastener Caution in the Preface section.
