Preliminary Procedures

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Remove the coil spring. Refer to Coil Spring Replacement.

1

Lower Control Arm to Support Bolt/Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
110 N·m (81 lb ft)

2

Lower Control Arm

Tip
After installation, check the rear alignment. Refer to Wheel Alignment Measurement.