GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Malibu 🢒 Suspension 🢒 Suspension General Diagnosis 🢒 Shock Absorber Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
  3. Using a suitable jack stand, support the knuckle.

    4. Object Number: 2013772 Size: SH
  4. Remove the lower shock absorber bolt (3) and the washer (2) from the knuckle (1).

    5. Object Number: 2013803 Size: SH
  5. Remove the upper shock mounting nuts (1).

    6. Object Number: 2013878 Size: SH
  6. Remove the shock absorber (1) from the vehicle.

Installation Procedure

    Object Number: 2013878 Size: SH
  1. Position the shock absorber (1)  in the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2013803 Size: SH
  2. Install the upper shock absorber nuts (1) and tighten to 25 N·m (18 lb ft).

    3. Object Number: 2013772 Size: SH
  3. Install the lower shock absorber bolt (3) and the washer (2) in the knuckle (1). Tighten the lower mounting bolt to 180 N·m (133 lb ft).,
  4. Remove the jack stand from the knuckle.
  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  6. Lower the vehicle.