GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Malibu 🢒 Suspension 🢒 Wheel Alignment 🢒 Rear Camber Adjustment

    Object Number: 1237902 Size: SH
  1. Loosen the inner lower control arm cam bolt nuts.
  2. Rotate the cam bolts to the required camber specification setting. Refer to Wheel Alignment Measurement.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Maintain the camber setting while tightening the cam bolt nuts.

    4. Tighten
    Tighten the inner lower control arm (front) bolt nut to 110 N·m (81 lb ft).

    Important: Check the toe setting AFTER changing camber or caster.

  4. Check the camber setting after tightening.
  5. Adjust the camber setting if necessary.