Preliminary Procedures

1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement.
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement.
3. Remove the outside door handle. Refer to Rear Side Door Outside Handle Replacement.

1

Rear Side Door Outside Handle Housing Bolt

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Release the inside handle cable retainers before removing the door lock.
2. Disconnect the door lock electrical connector.
3. Remove the door lock with the outside handle housing.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Lock Bolt (Qty: 3)

Tighten
10 N·m (89 lb in)

3

Rear Side Door Outside Handle Housing

Procedure

1. Transfer the handle and lock rods to the new outside door handle housing.
2. Inspect the lock, lock cylinder and handle adjustments. Refer to Rear Side Door Outside Handle Rod Adjustment.