GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Malibu 🢒 Hybrid 🢒 Hybrid Energy Storage 🢒 36-Volt Battery Internal Cable Replacement

Removal Procedure

    Object Number: 1892888 Size: SH
  1. Disconnect the generator battery. Refer to Hybrid Battery Service Disconnect/Connect.
  2. Remove the 2 generator battery vent fan cover bolts (2).
  3. Remove the 12 generator battery cover bolts (1).

    4. Object Number: 1892893 Size: SH
  4. Remove the generator battery cover (1).

    5. Object Number: 2143774 Size: SH

    Important: Removing the interconnect cables will disable the 36 volts within the generator battery control module.

  5. Remove the generator battery terminal rubber cups.
  6. Remove the generator battery cable nuts.
  7. Remove the 36-Volt battery internal cable (1) from the battery.

Installation Procedure

    Object Number: 2143774 Size: SH
  1. Install the 36-Volt battery internal cable (1) to the battery.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the generator battery cable nuts and tighten to 8 N·m(71 lb in).
  3. Install the generator battery terminal rubber cups.

    4. Object Number: 1892893 Size: SH
  4. Install the generator battery cover (1).

    5. Object Number: 1892888 Size: SH
  5. Install the 12 generator battery cover bolts (1) and tighten to 8 N·m(71 lb in).
  6. Install the 2 generator battery vent fan cover bolts (2) and tighten to 8 N·m(71 lb in).
  7. Connect the generator battery. Refer to Hybrid Battery Service Disconnect/Connect.