Preliminary Procedures

1. Remove the front compartment sight shields. Refer to Front Compartment Sight Shields Replacement.
2. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement.
3. Remove the engine splash shield. Refer to Engine Splash Shield Replacement.

1

Front Fascia Bolt

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Remove the bolt from the front fascia bracket.

Tip
Reach underneath the wheelhouse to access the bolts.

Tighten
6 N·m (53 lb in)

2

Front Fascia Bolt

Procedure

Loosen the bolt in the front fascia bracket.

Tighten
6 N·m (53 lb in)

3

Front Fascia

Procedure

Pull the front fascia to disconnect from the fender side.

4

Front Fascia

Procedure

Pull up on the front fascia to disconnect from the upper fender.

5

Front Bumper Fascia

Procedure

1. Disconnect any electrical connectors.
2. Transfer components as necessary.