Your vehicle may have a content theft-deterrent alarm system.
With the ignition off, you can arm the system by pressing the Remote Keyless Entry (RKE) transmitter lock button.
The system will arm thirty seconds after all the doors are closed, or sixty seconds with any door open.
If you press the lock button on the RKE transmitter a second time while all the doors are closed, the system will arm immediately. The system will still arm in sixty seconds if a door is open. When the opened door is closed, it will also become armed.
The security light, located on the instrument panel cluster, will turn on to indicate that arming has been initiated. Once the system is armed, the security light will flash once every three seconds.
If the security light is flashing twice per second, this means that a door is open.
If you do not want to arm the system, you may lock the car with the lock knob on the doors.
To disarm the system:
• | Press the RKE transmitter unlock button. |
• | Turn the ignition on. |
Once the system is disarmed, the security light will stop flashing.
If the system is armed, it can be activated by either:
• | Opening the driver's door. This will cause a ten second pre-alarm chirp followed by a thirty second full alarm of horn and lights. |
• | Opening any other door. This will immediately cause a full alarm of horn and lights for thirty seconds. |
When an alarm event has finished, the system will re-arm itself automatically.
To turn off the system alarm:
• | Press the lock button on the RKE transmitter. The system will then re-arm itself. |
• | Press the unlock button on the RKE transmitter. This will also disarm the system. |
• | Insert the key in the ignition and turn it on. This will also disarm the system. |
If you hear three chirps when you press the unlock or lock buttons on the RKE transmitter, it means that the content theft security system alarm was triggered previously.