GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu Classic 🢒 Body Systems 🢒 Adjustable Pedals 🢒 Adjustable Pedal Module Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.

    2. Object Number: 1469984 Size: SH
  2. Carefully cut and remove the tie strap securing the adjustable pedal module to the I/P support beam.
  3. Remove the adjustable pedal module (1) from the side of the I/P support beam.
  4. Disconnect the electrical connector from the adjustable pedal module.

Installation Procedure

    Object Number: 1469984 Size: SH
  1. Remove the old 2-sided tape from the I/P support beam.
  2. If reinstalling the same adjustable pedal module, install NEW 2-sided tape to the module.
  3. Connect the electrical connector to the adjustable pedal module.
  4. Install the adjustable pedal module (1) to the side of the I/P support beam.
  5. Install a NEW tie strap to secure the adjustable pedal module to the I/P support beam.
  6. Install the closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.