Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the sunshade. Refer to Sunshade Replacement .

1

Vanity Mirror Assembly

Tip
Insert a plastic trim tool or finger tips at the tab locations to remove the vanity assembly from the sunshade.

2

Vanity Mirror Circuit Board

Tip

1. Remove the circuit board from the vanity mirror assembly by flexing the vanity mirror enough to release the circuit board from the retaining tabs.
2. Transfer circuit board to new vanity mirror assembly and route wire leads as shown.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Vanity Mirror Assembly

Tip
Insert a plastic trim tool or finger tips at the tab locations to remove the vanity assembly from the sunshade.