Removal Procedure
- Open the rear compartment.
- Remove the screws retaining the applique to the rear compartment lid.
- Gently pull on the rear applique retainers to disengage the applique from the rear compartment lid.
- Remove the applique from the rear compartment lid.
Installation Procedure
- Align the applique retainers to the rear compartment lid.
- Press the retainers firmly until fully seated.
- Close the rear compartment.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws.
Tighten
Tighten the screws to 3 N·m (27 lb in).