Digital Radio Receiver Replacement Sedan

Important: Do not swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock, "XM Theftlock" will be displayed.

1. Remove the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement.



2. Disconnect the electrical connectors from the receiver.



3. Remove the fastener from the receiver and remove the receiver.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the receiver and secure with the fastener.

Tighten
Tighten the fastener to 3 N·m (26 lb in).




2. Connect the electrical connector to the receiver.
3. Install the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement.
4. Perform the setup procedure for the digital radio receiver. Refer to Control Module References for programming and setup information.