GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu Classic 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Floor Shift Control Cable Replacement

Removal Procedure

    Object Number: 1518145 Size: SH
  1. Remove the console. Refer to Console Replacement.
  2. Press the tabs on the control cable and remove the cable from the control assembly.

    3. Object Number: 1518165 Size: SH
  3. Disconnect the control cable from the transaxle range switch lever.

    4. Object Number: 1518166 Size: SH
  4. Press the 2 tabs on the control cable and remove the cable from the control cable bracket.

    5. Object Number: 944396 Size: SH
  5. Remove the control cable grommet from the dash panel.
  6. Remove the control cable from the vehicle.

Installation Procedure

    Object Number: 944396 Size: SH
  1. Guide the control cable through the pass-through in the dash panel.
  2. Secure the control cable grommet by pressing the cable into the pass-through hole in the dash panel.

    3. Object Number: 1518166 Size: SH
  3. Install the control cable into the transmission bracket, push down until the tabs lock the cable to the bracket.

    4. Object Number: 1518165 Size: SH
  4. Install the cable to the transmission range switch lever by pressing down until the cable snaps into place.

    5. Object Number: 1518145 Size: SH
  5. Connect the control cable end to the control assembly lever.
  6. Connect the control cable to the pin on the control assembly.
  7. Secure the control cable into the control assembly by pushing into place.
  8. Install the console. Refer to Console Replacement.
  9. Adjust the control cable assembly. Refer to Shift Control Cable Adjustment .