Removal Procedure
- Remove the instrument panel (I/P) assembly. Refer to
Instrument Panel Assembly Replacement .
- Disconnect the wire harness clip at the left air outlet duct.
- Remove the left air outlet duct screws.
- Remove the left air outlet duct.
Installation Procedure
Important: Align the left air outlet duct to the left
air outlet duct extension.
- Install the left air outlet duct.
Notice: Refer to Fastener Notice in the Preface section.
- Install the left air outlet duct screws.
Tighten
Tighten the left air outlet duct screws to 2.5 N·m
(22 lb in).
- Connect the wire harness clip at the left air outlet duct.
- Install the I/P assembly. Refer to
Instrument Panel Assembly Replacement .