GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu Classic 🢒 Preface 🢒 Cautions and Notices 🢒 Body Rear Corner Upper Garnish Molding Replacement

Removal Procedure
  1. Disable the roof rail SIR system, if equipped. Refer to SIR Disabling and Enabling .

    2. Object Number: 1283406 Size: SH
  2. Remove the garnish trim fastener cover.
  3. Remove the garnish trim fastener.

    4. Object Number: 1171405 Size: SH
  4. Starting at the top, remove the garnish trim by pulling straight out.

Installation Procedure

    Object Number: 1171405 Size: SH
  1. Starting at the bottom, install the garnish trim into the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the garnish trim fastener.

    3. Tighten
    Tighten the fastener to 3 N·m (26 lb in).


    Object Number: 1283406 Size: SH
  3. Install the trim fastener cover.
  4. Enable the roof rail SIR system. Refer to SIR Disabling and Enabling.