SMU - Revised and New Rear Suspension tightening Specifications

This bulletin is being issued to revise and add tightening specifications in the Rear Suspension sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

These tightening specifications have been revised:

Support Assembly to Body Bolts -- Final Pass +60 degrees

Toe Link to Steering Knuckle Bolt -- First Pass 110 N·m (81 lb ft) / Final Pass -- +70 degrees

The following specification has been added:

Toe Link to Support Bolt -- 110 N·m (81 lb ft)