INFORMATION ON REAR SEAT BACK REMOVAL. Chevrolet Monte Carlo 1995

REVISION: 07/21/94

THIS BULLETIN IS BEING REVISED TO ADD THE "NOTE" UNDER SERVICE PROCEDURE. ----------------------------------------------------------------------

SUBJECT: INFORMATION ON REAR SEAT BACK REMOVAL

MODEL: 1995 CHEVROLET MONTE CARLO COUPE WITH OPTION AM9

SOME EARLY BUILT VEHICLES WITH FOLDING REAR SEAT BACK CUSHIONS (OPTION AM9) HAVE THE TWO (2) CENTER RETAINING TABS BENT OVER THE SEAT BACK WIRE FOR BETTER RETENTION.

SERVICE PROCEDURE:

TO REMOVE REAR SEAT BACK CUSHION ASSEMBLY ON THESE CARS:

NOTE: MAKE SURE TO STRAIGHTEN TABS BEFORE BACK CUSHION REMOVAL.

1. FOLD REAR BACKS DOWN AND LOCATE CENTER RETAINING TABS BY REACHING THROUGH OPENING AT TOP CENTER AND BEND TABS UP. (SEE FIGURE 1.)

2. FOLLOW SERVICE MANUAL, SECTION 10-10, PROCEDURE TO COMPLETE REMOVAL.

3. WHEN REINSTALLING, BE SURE TO BEND TABS DOWN FOR PROPER RETENTION.

WARRANTY INFORMATION:

FOR VEHICLES REPAIRED UNDER WARRANTY, USE: LABOR OPERATION: C7278 LABOR TIME: 0.6 HR.

FIGURES: 1

Object Number: 82925 Size: FS

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.