For 1990-2009 cars only
- Assemble the upper and lower gaskets (430, 429) for the automatic transmission case cover.
- Hold the manual valve in place and carefully assemble the case cover (400) onto the pins in the case.
- Finger start all transmission case cover bolts into the locations noted (434, 436, 805).
- Use 10 mm and 13 mm sockets in order to tighten all the bolts.
- Some transmission models have a temperature sensor (450) which is located in the case cover. Install the temperature sensor at this time.
Important: Do not use any type of adhesive or sealer when assembling the gaskets. You may use Transjel™ or equivalent as an aid.
Important: Do not use an impact wrench in order to tighten cover bolts.
Tighten
Tighten all the bolts to 20.0-27.0 N·m (14.7-20.0 lb ft).
Refer to Fastener Notice .
