THIS REVISION IS FOR 1996 3.1L - VIN M L82 AND 3.4L - VIN X LQ1 ENGINES. USE THE FOLLOWING SPECIFICATIONS IN ORDER TO PROPERLY DIAGNOSE THE FUEL SYSTEM PRESSURE:
FUEL SYSTEM PRESSURE SPECIFICATION 284-325 KPA (41-47 PSI)
PLEASE MAKE THE ABOVE CHANGES TO THE FOLLOWING TABLES IN THE APPROPRIATE SERVICE MANUALS.
* ENGINE CRANKS BUT DOES NOT RUN * FUEL PUMP RELAY CIRCUIT DIAGNOSIS * FUEL SYSTEM PRESSURE TEST * FUEL INJECTOR BALANCE TEST
FIGURES: 00 ATTACHMENTS: 00
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1996 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.