GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1997 🢒 Monte Carlo 🢒 Engine 🢒 Engine Controls - 3.1L 🢒 Throttle Position Sensor Replacement

Removal Procedure

    Object Number: 16239 Size: SH
  1. Remove the air inlet tube.
  2. Remove the TP sensor electrical connector.
  3. Remove the two TP sensor attaching screws.
  4. Remove the TP sensor.

Installation Procedure

    Object Number: 16239 Size: SH
  1. With the throttle valve in the normal closed idle position, install the TP sensor on the throttle body assembly.
  2. Install the two TP sensor attaching screws, using a thread-locking compound on the screws. Loctite® 262, GM Part No. 1052624, or equivalent should be used.
  3. Install the TP sensor electrical connector.

    4. Tighten
    Tighten the TP sensor attaching screws to 2.0 N·m (18 lb in)

  4. Install the air inlet tube.