Control Valve Body Cover and Gasket Disassemble for Chevrolet Monte Carlo 1997

1. Position the transmission so that the cover of the control valve body is facing upward.
2. Remove the following parts:

•	On transmissions with a cast aluminum cover:

-	11 flanged bolts (52)

-	2 stud bolts (58)

-	4 TORX® bolts (57)

•	On transmissions with a stamped steel cover:

-	15 flanged bolts (52)

-	2 stud bolts (58)

-	6 nuts and washers (50 & 51)

3. Remove the control valve body cover (53).
4. Remove the inner (55) and the outer (54) gaskets from the control valve body cover. In some models, remove the seal (59).