Disassembly Procedure
- Remove the retaining clips (1) (5)
from the reservoir assembly (2) and the hydraulic pump housing assembly (4).
- Remove the reservoir (2) from the hydraulic pump
housing assembly (4)
- Remove the O-ring seal (3) from the hydraulic pump housing
assembly (4).
- Discard the O-ring seal (3).
Assembly Procedure
- Lubricate the new O-ring
seal (3) with power steering fluid.
- Install the O-ring seal (3) to the reservoir (2).
- Install the reservoir assembly (2) to the hydraulic pump
housing assembly (4).
- Install the retaining clips (1) (5) to the reservoir (2)
and to the hydraulic pump housing assembly (4).