GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Monte Carlo 🢒 Engine 🢒 Engine Electrical 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure

    Object Number: 15967 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in engine electrical.
  2. Remove the attaching bolt/screws (2)
  3. Disconnect the MAP sensor electrical connector.
  4. Disconnect the MAP inlet vacuum hose.
  5. Remove the MAP sensor from the bracket

Installation Procedure

    Object Number: 15967 Size: SH
  1. Install the MAP sensor to the bracket
  2. Connect the MAP inlet vacuum hose.
  3. Connect the MAP sensor electrical connector
  4. Reconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in engine electrical.