A basic knowledge of the following items is required for
use of this section:
(Use of the diagnostic procedures in this section will be difficult
without this basic knowledge.)
Basic Electrical Circuits
An understanding of the following concepts is required:
| • | The basic theory of electricity |
| • | The meaning of the following terms: |
| • | The result of an open or shorted wire in a circuit |
| • | How to read and understand a wiring diagram |
Use Of Circuit Testing Tools
An understanding of the following concepts is required:
| • | The use of the J 39200 Digital Multimeter (DMM) |
| | Knowledge of the controls and their correct use is required. |
| | Important: Use a solid, unpainted chassis ground or the negative battery cable
when measuring the resistance to ground.
|
| • | How to measure the value of the following items: |
| • | The correct use of jumper wires for the following purposes: |
Refer to the introduction of Troubleshooting Procedures in Electrical
Diagnosis for a review of basic electrical troubleshooting knowledge.
General Motors Service Training also offers electrical and or electronic
courses.
