GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Monte Carlo 🢒 Body and Accessories 🢒 Doors 🢒 Door Handle Bezel Replacement

Removal Procedure

    Object Number: 293531 Size: MH
  1. Remove the front door inside handle bezel screw (5).
  2. Remove the inside handle bezel (4) from the trim panel.
  3. Disconnect the electrical connector, if equipped.

Installation Procedure

    Object Number: 293531 Size: MH
  1. Connect the electrical connector, if equipped.
  2. Position the handle bezel (4) to the inner trim panel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the inside handle bezel screw.

    4. Tighten
    Tighten the bezel screw to 2 N·m (18 lb in).