Front Side Door Outside Handle Rod Adjustment for Chevrolet Monte Carlo 1998

When servicing a vehicle with outside handle-to-lock rods, remove all free play between the outside handle and the lock. Also, do not operate the outside handle before making these connections.

1. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
2. Remove the energy absorber pad (coupe only). Refer to Front Side Door Inner Panel Lower Energy Absorber Replacement .
3. Remove the water deflector as needed. Refer to Front Side Door Water Deflector Replacement .



4. Cut off the outside handle rod-to-lock clip from the lock.

Use side cutters.

5. Unscrew the remainder of the clip from the outside handle rod.
6. Discard the clip.

1. Snap a new outside handle rod-to-lock clip onto the door lock lever.
2. Position the outside door handle rod in the clip in order to eliminate any free play in the outside door handle.
3. Snap the clip cover closed over the threaded outside door handle rod.
4. Install the water deflector as needed. Refer to Front Side Door Water Deflector Replacement .
5. Install the energy absorber pad (coupe only). Refer to Front Side Door Inner Panel Lower Energy Absorber Replacement .
6. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
7. Inspect the door lock system for proper operation.