GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Monte Carlo 🢒 Body and Accessories 🢒 Interior Trim 🢒 Center Pillar Upper Trim Panel Replacement

Removal Procedure
  1. Open the seat belt upper guide loop attachment cover.
  2. Remove the seat belt guide loop attachment nut.
  3. Remove the seat belt guide loop (1) attachment from the adjuster bracket.

    4. Object Number: 404251 Size: SH
  4. Pull on the trim panel to disengage the hook and loop fastners.

Installation Procedure

    Object Number: 404251 Size: SH
  1. Position the upper trim panel to the B-pillar.
  2. Push firmly on the upper trim panel in order to seat the hook and loop fastners.
  3. Install the upper seat belt upper guide loop attachment to the adjuster bracket.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the upper seat belt guide loop attachment nut.

    5. Tighten
    Tighten the guide loop attachment nut to 42 N·m (31 lb ft).