Electronic Brake Control Module Replacement for Chevrolet Monte Carlo 1999

1. Remove the I/P sound insulator panel. Refer to Instrument Panel Trim Pad Replacement in Body and Accessories.
2. Use pressure tabs in order to release the EBCM (1) from the EBCM bracket (2).
3. Remove the EBCM electrical connectors.

1. Install the EBCM electrical connectors.
2. Slide the EBCM (1) into the EBCM bracket (2) until pressure tabs secure the EBCM.
3. Install the I/P sound insulator panel. Refer to Instrument Panel Trim Pad Replacement in Body and Accessories.