GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Monte Carlo 🢒 Engine 🢒 Engine Cooling 🢒 Power Steering Pump Pulley Replacement

Removal Procedure

Tools Required

    • J 25033-C Power Steering Pump Pulley Installer
    • J 25034-C Power Steering Pump Pulley Remover

    Object Number: 293353 Size: SH
  1. Remove the power steering pump assembly from the vehicle. Refer to Power Steering Pump Replacement .
  2. Using the J 25034-C Remove the power steering pump pulley from the power steering pump.

Installation Procedure

    Important: 

       • Never use a hammer to install the power steering pulley.
       • Do not use an arbor press to install the power steering pulley.
       • The face of the pulley hub must be flush with the end of the pump driveshaft.

  1. Using the J 25033-C Install the power steering pump pulley to the power steering pump.

    2. Object Number: 293353 Size: SH
  2. Install the power steering pump assembly to the vehicle. Refer to Power Steering Pump Replacement .