Important: Always maintain cleanliness when servicing the fuel system components.

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
2. Remove the modular fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
3. Remove the fuel level sensor (5) from the modular fuel sender.

1. Install the fuel level sensor (5) to the modular fuel sender.
2. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
3. Tighten the fuel filler cap.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
5. Inspect for fuel leaks:

5.1.	Turn the ignition ON for 2 seconds

5.2.	Turn the ignition OFF for 10 seconds.

5.3.	Turn the ignition ON.

5.4.	Inspect for leaks.