- Connect the driver side
air bag yellow 2-way connector (4) located under the driver seat, if the vehicle
is equipped with a driver side air bag.
- Install the CPA to the driver side air bag yellow 2-way connector.
- Connect the frontal air
bags yellow 4-way connector located at the RH side of the instrument panel.
- Install the CPA to the frontal air bags yellow 4-way connector.
- Connect the frontal air bags yellow 4-way connector to the metal
rail.
- Install the RH instrument panel access hole cover.
- Install the SRS fuse
to the LH fuse block.
- Install the LH instrument panel access hole cover.
- Staying well away from the airbags, turn ON the ignition.
9.1. | The AIR BAG warning lamp will flash seven times. |
9.2. | The AIR BAG warning lamp will then turn OFF. |
- Perform A Diagnostic System Check - SIR
if the AIR BAG warning lamp does not operate as described.