The TPM Scan Tool Data List contains all the tire pressure monitoring system related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The column, 'Data List,' indicates the location of the parameter within the scan tool menu selections.
Use the TPM Scan Tool Data List as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all the diagnostic procedures with the TPM Diagnostic Starting Point. Use the TPM Scan Tool Data List only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| OR |
| • | The DTC or symptom diagnostic procedure indicated by the diagnostic system check does not resolve the customer concern. |
The Typical Data Values are obtained from a properly operating vehicle under the conditions specified in the first row of the Scan Tool Data List table. Comparison of the parameter values from the suspect vehicle with the Typical Data Values may reveal the source of the customer concern.
Ignition is ON, engine OFF, and vehicle is stationary | |||
|---|---|---|---|
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
Auto Learn Mode Active | TPM | Yes/No | No |
Left Front Wheel Speed | ABS/TCS/TPM | km/h or mph | 0 |
Left Rear Wheel Speed | ABS/TCS/TPM | km/h or mph | 0 |
Low Tire Pressure | TPM | Yes/No | No |
Monitor Mode 1 | TPM | Active/Inactive | Inactive |
Monitor Mode 2 | TPM | Active/Inactive | Inactive |
Right Front Wheel Speed | ABS/TCS/TPM | km/h or mph | 0 |
Right Rear Wheel Speed | ABS/TCS/TPM | km/h or mph | 0 |
TPM Reset Switch | TPM | Pressed/Released | Released |
