Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the system operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 |
Does the voltage measure greater than the specified value? | 1.0 V | Go to Step 5 | Go to Step 3 |
3 | Inspect for poor connections at the harness connector for the wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 4 |
4 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | -- | Go to Step 13 | -- |
5 |
Does the voltage measure greater than the specified value? | 1.0 V | Go to Step 7 | Go to Step 6 |
6 | Repair the open in CKT 113. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 13 | -- |
7 | Backprobe from the wiper/washer switch connector, terminal B9, to ground, to ground using a J 39200 . Does the voltage measure greater than the specified value? | 1.0 V | Go to Step 10 | Go to Step 8 |
8 | Inspect for poor connections at the harness connector for the wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 9 |
9 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | -- | Go to Step 13 | -- |
10 | Measure the voltage from the wiper motor connector, terminal E, to ground. Does the voltage measure greater than the specified value? | 1.0 V | Go to Step 12 | Go to Step 11 |
11 | Repair the open in CKT 112. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 13 | -- |
12 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Did you complete the replacement? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
