Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the system operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Turn ON the ignition, with the engine OFF. Does the instrument cluster (IPC) display the LOW WASHER FLUID message? | -- | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections |
3 |
Does the scan tool display OK? | -- | Go to Step 5 | Go to Step 4 |
4 | Test the signal circuit of the windshield washer solvent level switch for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 7 | Go to Step 6 |
5 | Replace the windshield washer solvent level switch. Refer to Windshield Washer Solvent Container Replacement . Did you complete the replacement? | -- | Go to Step 7 | -- |
6 | Replace the IPC. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System Ok | Go to Step 2 |
